전동건용 롱타입 브러쉬 리스 모터 

• M4계열등에 가장 많이 사용 되는 롱타입 모터로 브러쉬가 없어 반영구적인 수명과 토크가 일정하고 좋습니다
• 7.4V 로 약 21,600RPM의 강력한 회전으로 소형 베터리 사용하는 유저에게 권장합니다.
• 모터는 2~5점사 
• 즉각적인 연사 모드 변경 타이밍 기능
• 연속적인 발사에서 0~299발까지 격발 수를 제한하는 기능
• 저전압으로 부터 베터리와 모터를 보호하는 기능 들이 추가 되었습니다.
• 배선 작업이 필요합니다. - 전문가에게 작업 의뢰 하실 것을 권장합니다.

With the Xpert GP350 from Novatech, the Brushless Technology from the RC Hobby finally arrives in the airsoft scene! 

This hightech motor delivers up to 40% more power compared to conventional motors and consumes the same battery voltage with up to 14% less power. The integrated Mosfet offers not only a programmable battery monitoring and voltage display but also the ability to set a burst mode with timing (only in a foreign country, not allowed in Germany). The integrated temperature monitoring and the quiet operation round off the package. 

We recommend to use this motor up to 7.4V with M140. If more tuning is required, an 11.1V LiPo can be used without any problems, however then there should be used only very high-quality Gears and a Piston with Steelteeths used. 

Features:

- Brushless HighTech Motor 

- 15-20% faster than conventional brush motors 

- Integrated Mosfet 

- 30-40% faster response to normal motors 

- Quickly pulls stronger springs, without TorqueUp Gears 

- Consumes 10 - 14% less electricity than conventional motors with the same spring strength 

- Integrated battery monitoring for LiPos (programmable) 

- Programmable burst mode (2-5 shot) (only for models with FullAuto mode) 

- Burst / Full Auto Delay programmable (only for models with FullAuto Mode) 

- Integrated temperature monitoring 

- Acoustic playback in case of errors 

- In order to avoid severe damage to the internals, the motor switches off automatically as soon as the resistance becomes too low or too high. 

- Current battery voltage is displayed (programming box) 

- Very silent and low temperature development 

- Suitable for all common Airsoft weapons with a long-type motor 

- Programming cable may be added e.g. into the buffer chamber (motor plate may have to be slightly reworked) 

- Programming box included in delivery 

- Attention: soldering is required for installation! 

- Dimensions: 24x28mm, suitable for all normal pistol grips. 

We recommend the following motor / spring combinations: up to M140 - 7,4V LiPo, from M150 - 11,1V LiPo. 11.1V LiPo only in conjunction with high-quality internals use since engine delivers very high torque! 

제품 설정 방법 - 메뉴얼 참고[ 내용의 이미지와 함께 참조하세요] 

========================================

 1. 단일 발사 타이밍 설정